Skip to content
Voltarum Mini PC Guide

Beelink EQ14 vs GMKtec G3 Plus

Our verdict

Editorial opinionOur verdict

Same N150 chip. The EQ14 adds a second 2.5 GbE port, a second full-size NVMe slot and a built-in power supply; the G3 Plus is cheaper and takes up to 32 GB. For a router or NAS, the EQ14; for a cheap Home Assistant box or desktop, the G3 Plus.

Factual dataBeelink EQ14GMKtec G3 Plus
ProcessorIntel N150Intel N150
Cores / threads4 / 44 / 4
RAM16 GB32 GBMore
Drive slots22
Network2 × 2.5 GbEAdvantage1 × 2.5 GbE
Video engine (encode)H.264, HEVC 8-bit, HEVC 10-bit (HDR), VP9H.264, HEVC 8-bit, HEVC 10-bit (HDR), VP9
Processor power6 W6 W
Size126 × 126 × 39 mm114 × 106 × 42.5 mm
Price from$385$330Advantage

What each one is good forDerived from the specs

UsesBeelink EQ14GMKtec G3 Plus
Home AssistantGreat fitOfficial or well-supported Home Assistant OS imageGreat fitOfficial or well-supported Home Assistant OS image
Media serverGreat fitIntel Quick Sync: the best-supported transcoding in Plex and JellyfinGreat fitIntel Quick Sync: the best-supported transcoding in Plex and Jellyfin
Homelab / ProxmoxGoodUp to 16 GB of RAM in SO-DIMM slotsGoodUp to 32 GB of RAM in SO-DIMM slots
Router / firewallGreat fit2 network ports, up to 2.5 GbELimitedOne network port: only as a 'router on a stick' with VLANs and a managed switch
NASGood2 internal drive slots (2× M.2)Good2 internal drive slots (2× M.2)
DesktopGoodWindows 11 supportedGoodWindows 11 supported
Electronics / GPIONot suitableNo GPIO header: add a USB microcontroller board insteadNot suitableNo GPIO header: add a USB microcontroller board instead

Software supportEditorial opinion

Windows 11ExcellentExcellent
Linux (Debian, Ubuntu or vendor image)ExcellentExcellent
Proxmox VEExcellentExcellent
Home Assistant OSExcellentExcellent
OPNsense / pfSense / OpenWrtExcellentExcellent